A construction hoist busbar is a special product for power transmission for construction hoists. It is also called building hoist sliding line, passenger hoist busbar sliding contact line; In the past, construction hoist cables were used for power transmission, but due to the cables’ weight, they were easily damaged. In addition, the price of recyclable cables is relatively high, so the theft risk is also very high. Therefore, as a new type of power transmission product, construction hoist busbars have been welcomed and recognized by more and more customers.

The construction hoist busbar advantages:

(1) Does not occupy the load capacity of the elevator: The busbar is fixed on the mast section, and the weight is decomposed into each mast section, which will not increase the load of the cage.

(2) Not affected by weather: The busbar is fixed on the mast section. No matter how strong the wind is, the busbar is stationary and will not affect the operation of the construction elevator.

(3) Not easy to lose: The added value of the busbar after disassembly is not high and it is not profitable.

(4) Easy to replace when damaged: The busbar is an assembly part. If any part is damaged, only the damaged part needs to be replaced, and the whole part does not need to be replaced. Part replacement is relatively simple. You only need to disassemble the joint on-site to replace it.

(5) No roof bulging: When the construction elevator is equipped with a busbar if the limit fails and the collector rushes out of the top of the busbar, the system will automatically cut off the power, the elevator will stop running, and there will be no roof bulging.

(6) Can be connected according to the progress of the project: Each busbar is 3016mm long, which is equivalent to the height of two standard sections. The connection method is plug-in type, and it can be connected as the standard section is raised.

(7) Recyclable: The busbar can normally be used for 4 to 6 years and can be used again after the project is completed.

Type of construction hoist busbar sliding contact line:

BHFS-5-8A/40 8mm2 busbar

BHFS-5-16A/80 16mm2 busbar for passenger material hoist

BHFS-5-25D/130 25mm2 Construction hoist busbar

BHFS-5-35C/165 35mm2

BHFS-5-50A /225 50mm2

BHFS-4W-16A/80 16 square arc busbar

35 square tower crane slewing busbar

The construction hoist busbar mainly consists of the busbar and current collectors. It has many advantages. The current collector is installed on the side of the hoist cage, and the busbars are fixed on the mast sections connected one by one. This is a replacement for the power cable. The busbar can save the trouble of cable damage. It is more popularly applied for high-building construction. Conductor bars will be a trend in the future. For some high buildings, it is not convenient to use cable, Because it needs to consider the self-weight of the cable. When the cable is too long, it will be easy to break if you hang the object. But using conductor bars will not have this trouble. Because the busbars are fixed on the mast section stably, they can withstand heavy wind. For an incline rack-and-pinion construction hoist for passengers or materials, the construction hoist busbar is much better than the cable trolley.